Floor Care.
Cleaning
Sweep or vacuum with a soft brush. Damp mop only — never wet. No steam mops. Use Bona timber floor cleaner or plain water with a wrung-out microfibre mop.
Products to Avoid
No vinegar, bleach, ammonia or abrasive cleaners. No oil-based soaps. If unsure, plain water is safest.
Scratches
Felt pads under all furniture legs — replace every 6 months. No dragging. Keep pet nails trimmed. Doormats at every entry to catch grit.
Spills
Wipe immediately. Standing water is the enemy — even small puddles left overnight cause white marks or swelling.
Rugs
Wait 2-4 weeks after final coat before laying rugs. Use breathable backing only — rubber-backed rugs trap moisture and discolour the finish.
Sunlight
UV changes timber colour over time. Use curtains during peak sun. Rotate rugs so the floor ages evenly.
Re-coating
A well-maintained floor needs a maintenance recoat every 7-10 years. High-traffic or homes with dogs may need it sooner. A recoat is a light scuff and fresh topcoat — quick and affordable.
Full Sand vs Recoat
A full sand strips back to bare timber — most floors only need this every 15-20 years. A recoat extends the existing finish without stripping.
Professional Finishes.
Brendan uses professional-grade finish systems from brands including Bona, Loba, Synteko — trusted in commercial and residential projects across Australia.
Standard application: one seal coat and two top coats. Water-based means low odour, non-toxic, and walk-on within hours. Available in matt, satin, semi-gloss and gloss.
Also offers solvent-based polyurethane for a warm amber tone and maximum durability.